0800 978 8945

mobile: 07412 653 650

• Heating Controls - Did you know?

• Over 80% of home energy consumption is spent on heating and hot water?*
• A wet system with no heating controls uses up to 20% more energy than a one that uses a minimum set of heating controls?*
• Heating controls which reduce the average temperature by just 1ºC will save up to 10% of your energy consumption?*
• Reducing heating "on" time by just 2 hours a day saves up to 6%?* (* Source: TACMA)

What is a programmer?

Programmers allow you to set 'On' and 'Off' time periods. Some models switch the central heating and domestic hot water on and off at the same time, while others allow the domestic hot water and heating to come on and go off at different times. 
Set the 'On' and 'Off' time periods to suit your own lifestyle. On some programmers you must also set whether you want the heating and hot water to run continuously, run under the chosen 'On' and 'Off' heating periods, or be permanently off. 
The time on the programmer must be correct. Some types have to be adjusted in spring and autumn at the changes between Greenwich Mean Time and British Summer Time. 
You may be able to temporarily adjust the heating programme, for example, 'Override', 'Advance' or 'Boost'. These are explained in the manufacturer's instructions. 
The heating will not work if the room thermostat has switched the heating off. And, if you have a hot-water cylinder, the water heating will not work if the cylinder thermostat detects that the hot water has reached the correct temperature. 


What is a thermostatic radiator valve (TRV)?

TRVS sense the air temperature around them and regulate the flow of water through the radiator which they are fitted to. They do not control the boiler. 
They should be set at a level that gives you the room temperature you want. These settings may have to be different in each room, and you should set the TRVS to suit each room and then leave them to do their job. 
Turning a TRV to a higher setting will not make the room heat up any faster. How quickly the room heats up depends on the boiler size and setting, and the radiator size. Turning a TRV to a lower setting will result in the room being controlled at a lower temperature, and saves energy
TRVS need a free flow of air to sense the temperature, so they must not be covered by curtains or blocked by furniture. 
TRVS cannot turn off the boiler when the whole house is warm. To do that, you will need a room thermostat as well. The radiator in the room with the room thermostat should not normally have a TRV, but, if it does, keep the TRVon the maximum setting and adjust the room thermostat as explained with the instructions. 


What is a programmable room thermostat?

A programmable room thermostat is both a programmer and a room thermostat. A programmer allows you to set 'On' and 'Off' time periods to suit your own lifestyle. A room thermostat works by sensing the air temperature, switching on the heating when the air temperature falls 
below the thermostat setting, and switching it off once this set temperature has been reached. 
So, a programmable room thermostat lets you choose what times you want the heating to be on, and what temperature it should reach while it is on. It will allow you to select different temperatures in your home at different times of the day (and days of the week) to meet your particular needs. 
Turning a programmable room thermostat to a higher setting will not make the room heat up any faster. How quickly the room heats up depends on the design of the heating system, for example, the size of boiler and radiators. 
Neither does the setting affect how quickly the room cools down. Turning a programmable room thermostat to a lower setting will result in the room being controlled at a lower temperature, and saves energy. 
The way to set and use your programmable room thermostat is to find the lowest temperature settings that you are comfortable with at the different times you have chosen, and then leave it alone to do its job. The best way to do this is to set low temperatures first, say 18°C, and then turn them up by one degree each day until you are comfortable with the temperatures. You won't have to adjust the thermostat further. Any adjustments above these settings will waste energy and cost you more money. 
If your heating system is a boiler with radiators, there will usually be only one programmable room thermostat to control the whole house. But you can have different temperatures in individual rooms by installing thermostatic radiator valves (TRVS) on individual radiators. If you don't have TRVS, you should choose a temperature that is reasonable for the whole house. If you do have TRVS, you can choose a slightly higher setting to make sure that even the coldest room is comfortable, then prevent any overheating in other rooms by adjusting the TRVS.
The time on the programmer must be correct. Some types have to be adjusted in spring and autumn at the changes between Greenwich Mean Time and British Summer Time. 
You may be able to temporarily adjust the heating programme, for example, 'Override', 'Advance' or 'Boost'. These are explained in the manufacturer's instructions. 
Programmable room thermostat need a free flow of air to sense the temperature, so they must not be covered by curtains or blocked by furniture. Nearby electric fires, televisions, wall or table lamps may prevent the thermostat from working properly. 


What is a cylinder thermostat?

A cylinder thermostat switches on and off the heat supply from the boiler to the hot-water cylinder. It works by sensing the temperature of the water inside the cylinder, switching on the water heating when the temperature falls below the thermostat setting, and switching it off once this set temperature has been reached. 
Turning a cylinder thermostat to a higher setting will not make the water heat up any faster. How quickly the water heats up depends on the design of the heating system, for example, the size of boiler and the heat exchanger inside the hot-water cylinder. 
The water heating will not work if a time switch or programmer has switched it off. And the cylinder thermostat will not always switch the boiler off, because the boiler sometimes needs to heat the radiators. 
Cylinder thermostat are usually fitted between one quarter and one third of the way up the cylinder. The cylinder thermostat will have a temperature scale marked on it, and it should be set at between 60C and 65C, then left to do its job. This temperature is high enough to kill off harmful bacteria in the water, but raising the temperature of the stored hot water any higher will result in wasted energy and increase the risk of scalding. 
If you have a boiler control thermostat, it should always be set to a higher temperature than that of the cylinder thermostat. In most boilers, a single boiler thermostat controls the temperature of water sent to both the hot-water cylinder and radiators, although in some there are two separate boiler thermostats.

Hopefully this arms you with all the information you need to know how heating controls work so your home will be sufficiently heated using the least amount of energy possible.

 

 

 

A bypass circuit must be installed if the boiler manufacturer requires one, or specifies that a minimum flow rate has to be maintained while the boiler is firing.The installed bypass circuit must then include an automatic bypass valve (not a fixed-position valve). Automatic by-pass valves are especially necessary if your heating system includes lots of Thermostatic Radiator Valves (TRV's). Theautomatic by-pass valve will maintain correct water flow through the boiler when the TRV's start to close. Automatic by-pass valves will also be likely to reduce noise levels in systems which are noisy due to excess water velocities.